Roadstone provided 2,274m2 of 80mm Castlestone Paving (Curragh Blend) with an antiqued finish for the trafficked areas and 40m2 of 80mm Castlestone Paving (Charcoal ) with an antiqued finish for the car parking area.
1200m2 of Aqua Cobblesett (Tan) was supplied for the pedestrian areas both within the complex and on the pathways. A total of 1332m of Roadstone’s Splayed Kerb Blocks (charcoal) were also used to compliment all paved areas. Finally 5m2 of Tactile Paving Slabs (Cordorouy) were used at pedestrian crossings.
Formpave UK, in association with Roadstone, designed this bespoke paved surface to accommodate traffic and provide for permeable areas for pedestrian access and enjoyment. All the permeable build-up stone was provided by local Roadstone Quarries.
Water run-off from the Permeable Paved areas is filtered through;
2 – 4mm grit is brushed into the paving.
80mm ML Aquaflow Paving Blocks.
50mm depth of 2 – 6mm laying course.
350mm deep sub-base of specification graded stone with 30% voids to maximize storage.